Calculate Latest FAR in Noida

Calculate Latest FAR in Noida

Our Noida FAR Calculator will give you

Calculating Floor Area Ratio – FAR in Noida (As per local Building By Laws)

Step 1:

Check the Floor area ratio (FAR) for your plot in Noida from the table below. If you have the plot size in sq. yards then make sure to convert it to sq. m by multiplying it by 0.836. The table shown below is only applicable for plots in Noida

Area of Noida
Plot (sq. meter)
Max. Ground
Coverage %
FAR
Below 50 75 180
Above 51 to 75 75 180
Above 201 to 300 75 180
Above 301 to 400 65 180
Above 401 to 500 65 180
Above 601 to 750 60 150
750 and Above 60 150

Step 2:

To take an example, say, your plot size is 300 sq. yards. Convert 300 sq. yards to sq. meters by multiplying it by 0.83. After conversion 300 sq. yards comes out to be 250 sq. meters.

For a 250 sq. meters plot in Noida the FAR = 180 (as checked from the table).

 

FAR = (Total area of all floors * 100)/ Plot Area

 

FAR = (Total area of all floors * 100)/ Plot Area

Therefore, Total area of all floors = (FAR*Plot Area)/100

 

Total area of all floors for 300 sq. yards = (300*180*9)/100 = 4860 sq. ft.

(Factor of 9 has been used to convert plot size from sq. yards to sq. ft.)

Step 3:

If you plan to use all of your Noida property’s FAR, then UP Building By Laws allows you to build a maximum of 4 floors. Therefore, the footprint per floor is 4751.84 / 4 = 1188 square feet.

Note: Balconies, mold parking spaces, basements, elevator shafts, and turbidity are not included in the Floor Ratio (FAR) calculation. This list is not exhaustive and some areas may be added as the drawing is completed

Practical application of FAR

The most practical way to define the concept of area ratio (FAR) is to give an example. FAR 100 means that as a homeowner, you can build a one-story building on your property or a two-story building in the center of your property. FAR 200 means you can build a two-story building on your property or a four-story building on half of your property, and so on.

What are the benefits of setting AWAY for a city to its citizens?

Every city is like a structure and is therefore limited by the capacity it can withstand. Exceeding this capacity can cause various problems. FAR measures the resilience of a city to maintain the general welfare of its citizens based on many factors such as its ability to cope with natural disasters and others.