FAR CALCULTOR FOR FARIDABAD
Understanding Far
Floor area ratio (FAR) is a measure of the total floor space allowed on a plot, obtained by dividing the sum of all floor areas by the plot area. It indicates the intensity of land use on the site.
Ground Coverage Explained
Ground coverage refers to the portion of the plot area occupied by built structures at ground level. In this calculation, the areas taken into account include shafts, chutes, lift wells, and staircases. However, certain elements like ventilation shafts larger than 3 square meters, fire staircases, atriums, and open courtyards of permitted dimensions are exempt from being considered in the ground coverage calculation.
Dwelling Units Defined
As we comprehend it, a dwelling unit denotes a building or its segment designed for human habitation, accommodating a kitchen, toilet, and living space, intended for use by an individual or a family.
Permitted height for residential plots in Faridabad
According to the Haryana Building Code-2017, an amendment was introduced on 20th October 2020, setting the maximum allowable height for buildings at G+3 (including stilt + 4) to be 16.5 meters.
Is the construction of stilts compulsory for residential plot development in Faridabad?
For buildings exceeding G+2 floors, a stilt floor is obligatory. Alternatively, if a stilt is not incorporated, the plot must showcase the number of required car parks within its boundaries. Each Equivalent Car Space (ECS) covers an area of 12.5 square meters and should be utilized to determine the adequate parking space.
Practical implementation of FAR
Floor Area Ratio (FAR) determines the extent of building development permitted on a given plot. For instance, an FAR of 100 would allow constructing a one-story building covering the entire plot or a two-story building covering half of it. If a 300 sq. yard (250 sq. m) plot in Faridabad has an FAR of 264, it allows building 2.64 floors with two floors occupying the entire area and the third floor using 64% of the area, or constructing four floors with 66% of the area (approximately 1767 sq. ft. or 165 sq. m).
FAR CALCULTOR FOR FARIDABAD
Understanding Far
Floor area ratio (FAR) is a measure of the total floor space allowed on a plot, obtained by dividing the sum of all floor areas by the plot area. It indicates the intensity of land use on the site.
Ground Coverage Explained
Ground coverage refers to the portion of the plot area occupied by built structures at ground level. In this calculation, the areas taken into account include shafts, chutes, lift wells, and staircases. However, certain elements like ventilation shafts larger than 3 square meters, fire staircases, atriums, and open courtyards of permitted dimensions are exempt from being considered in the ground coverage calculation.
Dwelling Units Defined
As we comprehend it, a dwelling unit denotes a building or its segment designed for human habitation, accommodating a kitchen, toilet, and living space, intended for use by an individual or a family.
Permitted height for residential plots in Faridabad
According to the Haryana Building Code-2017, an amendment was introduced on 20th October 2020, setting the maximum allowable height for buildings at G+3 (including stilt + 4) to be 16.5 meters.
Is the construction of stilts compulsory for residential plot development in Faridabad?
For buildings exceeding G+2 floors, a stilt floor is obligatory. Alternatively, if a stilt is not incorporated, the plot must showcase the number of required car parks within its boundaries. Each Equivalent Car Space (ECS) covers an area of 12.5 square meters and should be utilized to determine the adequate parking space.
Practical implementation of FAR
Floor Area Ratio (FAR) determines the extent of building development permitted on a given plot. For instance, an FAR of 100 would allow constructing a one-story building covering the entire plot or a two-story building covering half of it. If a 300 sq. yard (250 sq. m) plot in Faridabad has an FAR of 264, it allows building 2.64 floors with two floors occupying the entire area and the third floor using 64% of the area, or constructing four floors with 66% of the area (approximately 1767 sq. ft. or 165 sq. m).